Acrylic Roof Coatings
Bright, breathable reflective coatings for metal and sloped roofs
- Free Roof Inspection
- Local Gulf Coast Crews
- No Tear-Off Required
Acrylic Roof Coatings on the Gulf Coast
Acrylic roof coatings are the workhorse system for metal and sloped roofs that shed water well but take a beating from sun, salt air and thermal movement. We apply a bright, elastomeric acrylic membrane that expands and contracts with the panels underneath, seals fastener heads and lap joints, and puts a highly reflective barrier between your building and the Gulf Coast sun.
Acrylic is breathable, environmentally friendly and cost-effective per square foot, which makes it the smart choice on large metal roofs where rust is starting to show but the panels are still sound. Applied over properly primed and rust-treated steel, it stops corrosion where it started and restores a clean, uniform finish across the whole roof.
Every install covers the essentials
- Elastomeric finish that flexes with metal panel expansion and contraction
- Seals every fastener head, lap joint and panel seam across the roof
- Rust treatment and primer on corroded areas before any coating goes down
- High solar reflectance for cooler roof decks and lower cooling loads
- Excellent coverage economics on large metal and sloped roof areas
- Restores a clean, uniform appearance without replacing sound panels
Four steps from first call to a sealed roof
Assess the Panels
We check panel condition, fastener integrity and rust progression to confirm acrylic is the right system for your roof.
Wash & Treat Rust
The roof is thoroughly washed, then corroded areas are treated and primed so the coating bonds to stable metal.
Seal Seams & Fasteners
Laps, ridges, flashings and every fastener head are sealed and reinforced before the field coat is applied.
Apply & Inspect
Acrylic is applied at the specified thickness in coats, then inspected panel by panel with you before we call it finished.
What separates a sealed roof from a coated one
Prep, detailing and film thickness decide whether a roof stops leaking for a decade or looks good for one season.
Leaks Actually Stop
Seams, flashings and penetrations are repaired and reinforced before the membrane goes on — not coated over and hoped for.
Storm-Season Ready
Details are built for wind-driven rain, the failure mode that soaks Gulf Coast buildings first.
Lower Cooling Load
A bright reflective finish sends solar energy back into the sky instead of into your roof deck.
Years Added, Not Days
A properly specified system defers a full tear-off for a decade or more, and can be recoated instead of replaced.
How we work, on every roof
A coating is only as good as the prep underneath it. These are the habits we hold to on every roof, whether it is a house in Biloxi or a warehouse in Baton Rouge.
Photographed Inspections
You see what we saw on the roof, and what it means, before you decide anything.
Real Surface Prep
Wash, dry, repair, treat rust and prime. Prep is where coating jobs are won or lost.
Full Spec Thickness
We apply the mil thickness the manufacturer's system requires — not a thin coat that looks the same on day one.
Reinforced Details
Fabric and sealant at every seam, drain, curb and penetration before the field coat.
Drain-by-Drain Walkthrough
We review the finished roof with you and confirm every detail drains and seals as intended.
Questions about this service
Explore our other roof systems
Silicone Roof Coatings
Seamless, ponding-water-proof protection for flat and low-slope roofs
Explore Silicone Roof Coatings
Roof Waterproofing Systems
Complete, engineered protection built for Gulf Coast storms
Explore Roof Waterproofing Systems
Roof Renovations
Restore a tired roof to full performance without a full tear-off
Explore Roof RenovationsGet a free estimate for acrylic roof coatings
Share a few details about the roof and we will get back to you with clear next steps — inspection, options and a written price.